According to the official Weibo of SINOMACH, the world's largest single solar power station project contracted by SINOMACH - Eldafra PV2 solar power station has been fully completed.

For almost 200 centuries, copper has been the best material for electrical wiring, and for all the right reasons. With the invention of the telegraph and electromagnet in the 1800s, the chemical element became more widely used, more so with the advent of the telephone in 1976. It’s used in a range of technologies and applications, be it power cables, kitchen appliances, or to manufacture computers and tools. Besides, copper is used for making electric wires as you already know.

Carry out a full route survey, and make sure that representatives of each organisation potentially affected by the installation are present.Ensure that the right-of-way is free of obstacles, like guy wires and trees.Gain permission from any property owners and relevant authorities if you need to set up any equipment on private land.Make sure you have a properly trained and certified crew. They’ll need to be competent when working at heights, and have the right permits if working near power cables. Also, aim to employ experienced linemen that understand the aerial environment and its particular challenges.Make sure all of the necessary environmental checks and provisions are addressed, including accounting for wind and ice loads, galloping and vibration.Once you’ve completed the survey and gained all necessary permissions, you will need to decide whether you want to install the cable using stationary or moving reels.

When there are telegraph poles between buildings, steel wire rope can be set up between buildings and poles, and optical cable could be thus tied on it; if there are no telegraph poles between buildings, but the distance is about 50m, optical cable can also be directly set up between buildings with steel wire rope.

Aerial fiber optic cable is a type of fiber optic cables that is usually used for outside installation on poles. Due to its installation environment, the design of aerial fiber optic cable must consider to protect it from the destruction of the nature and man-made damage or theft. Aerial cable's laying method is not hard to implement as it can utilize the existing overhead pole line to install that saves more in construction costs and shortens the construction period. Aerial cables are mainly used for secondary trunk level and below and usually applied to flat terrain or low fluctuation area. They are easily affected by the natural disasters, such as typhoons, ice, floods etc. as well as the influence of an outside force and the mechanical strength weakening in themselves. Therefore, the failure rate of aerial fiber optic cables are higher than the pipeline or directly buried fiber optic cables.

However, maintaining the integrity of these networks is essential to ensure optimal performance. One significant challenge faced by network operators is signal loss, which can significantly impact the quality of service. In this article, we will explore the role of aerial construction in preventing fiber optic signal loss and its importance in maintaining network efficiency and reliability.

Aerial cable types are typically used for outdoor aerial installation on poles. Its characteristic lies in its design, which is structured according to its installation environment. Since these cables are installed outside, aerial fiber optic cables are strong enough to withstand natural calamities and man-made damage or theft. Aerial cables are mainly used at the secondary trunk level and below. This type of cable is helpful for flat terrain or low-lying areas prone to fewer fluctuations.The installation method of aerial cables is simple to implement. They can utilize the existing overhead lines on the poles outside on the roads. This leads to shorter construction periods and a reduction in construction costs.

As technology and internet usage advance, so does the way we transmit data. Fiber optic cables are now the gold standard for sending information quickly and securely. While many communities have opted to use aerial fiber optic cables, running fiber optic cables underground has its own set of pros and cons, the most widely argued is centered on the cost of underground implementation. With a new era of legislation and public grant funding aimed at bridging the digital divide across Washington and America, this topic merits revisiting.

Based on the installation position of the cables, aerial fiber optic cables can be divided into self-supporting and catenary type. Catenary type optical cable is a type of cable that suspends a outdoor fiber cable on another suspension wire fastened to a pole, which carries tension. While self-supporting type is directly laid on the pole, overcoming long-distance and carrying tension through the structure of the cable.

Rubber has been used as cable insulation and sheathing material long before other insulation such as PVC and PE can to be commonly applied. It remains widely used across domestic and industrial applications.

Rubber cable is a rubber sheathed cable, as the name suggests is a variety of rubber or equivalent performance of the thermosetting elastomer for the insulation and sheath-based wire and cable. The so-called thermosetting plastic elastomer is after a heating curing, its shape is because molecular chain internal hinge and make the shape to stabilize (usually the process called curing or cross-linking) again on the heating can not let it again to viscous flow state, and then again the of processing and molding of the elastomer.

Construction projects have seen tremendous advancements in technology, which have paved the way for innovative solutions to improve structural integrity and safety. One of those solutions is prestressed concrete strand (PC strand).

Ever wondered how several construction designs for tower construction, such as long-span bridges and overhead crane beams, stay intact and secured? Industrial steel strands are an essential piece of hardware used in these concrete structures for reinforcement and security.

PC strand, also known as prestressed concrete strand, is a type of steel reinforcement used in construction. It is made by taking high-tensile steel wire and subjecting it to a process known as prestressing.

Industrial strands are a crucial piece of hardware used for reinforcement and securement in concrete structures. Construction designs often use various types of strands for tower construction, large-span bridges, and overhead crane beams.Since industrial strands are responsible for supporting thousands of pounds of concrete, only the strongest, most durable materials must be used. Although nearly all industrial strands are made from steel, several different types are designed for varying applications.

PC Strand, the prestressed concrete steel strand, is a twisted steel cable composed of 2, 3, 7 or 19 high strength steel wires and is stress-relieved (stabilized) for prestressed concrete or similar purposes.

Perfect mechanical and chemical performance, weather aging resistance and mechanical strength; And is not affected by various acids, bases and organic solvents. Therefore, it is suitable for large environmental climate change and corrosive occasions, such as petrochemical, oil refining, oil well instrument control, etc.Good for welding connection. As a result of the general plastic melting temperature is low, easy to melt at high temperature, the need for skilled welding technology, and some welding points must have a certain welding time, which has become the reason why fluorine plastic cable is popular. Such as communication equipment and electronic equipment internal wiring.

XLPE hook-up is a single core wire manufactured under the UL 758 Appliance Wiring Material (AWM) standard. Several types exist with different voltage and temperature ratings. XLPE is an abbreviation for cross-linked polyethylene and refers to a process where the molecular structure of polyethylene changes as a result of including additives such as silane or peroxide or using high-energy electron or microwave radiation. This process changes polyethylene from a thermoplastic material that softens with heat to a thermoset material that does not soften or shrink when heated. It's also much tougher.

The term XLPE is used in the field of electrical wire and cable manufacturing a lot. XLPE stands for Cross-Linked Polyethylene which means Cross-linked or cross-linked Polyethylene as stated in the electrical cable standards.XLPE also has other abbreviations such as PE, PEX, XPE. This is a type of plastic produced from polyethylene plastic by changing the molecular structure of polymer chains so that they are more tightly bound together. XLPE is produced to replace PVC due to some outstanding advantages below.

XLPE insulated cable is a chemical or physical method that transforms the cable-insulating polyethylene molecules from a linear molecular structure into a main network structure.That is, the thermoplastic polyethylene is converted into a thermosetting cross-linked polyethylene, thereby greatly improving it.