Wire and cable are indispensable materials for the transmission of power energy, and is widely used in economic production, once the cable fails, it will not only threaten the safe and stable operation of the power grid, but also cause significant economic losses to families and society.

Cable, in electrical and electronic systems, a conductor or group of conductors for transmitting electric power or telecommunication signals from one place to another. Electric communication cables transmit voice messages, computer data, and visual images via electrical signals to telephones, wired radios, computers, teleprinters, facsimile machines, and televisions. There is no clear distinction between an electric wire and an electric cable.

Looking for a customisable illumination solution with great visual impact for outdoor spaces? Whether it be a terrace or garden, a patio or a porch, the outdoor UV resistant cable with Creative-Cables red fabric lining is the perfect solution for you! Not only these cables are compatible with the IP65 EIVA system, which guarantees protection against water and rain, they are also UV resistant which ensures durability and reliability.

A LAN cable, or Ethernet cable, is a physical cable that connects devices to a local area network (LAN). LAN cables usually connect computers, printers, routers, and other network devices. They are also used to connect gaming consoles and other devices that require a wired connection. LAN cables are made up of four pairs of copper wires twisted together to reduce interference from other electronic devices. The ends of the Lan Cable are terminated with RJ-45 connectors, which connect the cable to network devices.

Overhead fiber optic cable is an optical cable installed on poles. One of the most advantage for the overhead fiber optic cable is that it can use the original overhead wire and pole infrastructure. This overhead laying method can save a lot of construction costs and shorten the construction period.Since the overhead fiber optic cables are hung on electric poles, they are required to be able to adapt to various natural environments. They are generally used for long-distance lines, and overhead fiber cables are also suitable for dedicated network optical cable lines or some local special sections.

Risk of cable damage: Fiber optic cables are delicate and vulnerable to excessive pulling forces. Improper pulling techniques can cause stress on the cable, leading to signal loss or even breakage.Reduced network performance: Cable damage or improper installation can result in signal degradation, affecting the overall network performance.Increased installation time and costs: If the cable gets damaged during the installation, it will require additional time and resources to repair or replace, leading to increased costs and delays in project completion.

When you walk on the street, have you noticed at the fiber cables hanging on the poles overhead? These cables are commonly called as aerial fiber cables, which are widely used for outside plant (OSP) installation on poles. Aerial fiber cables are designed to accommodate the severe environment preventing the destruction of the nature and man-made damage or theft. There are also different types of aerial fiber optic cables. This article will describe the common installation ways and things to notice during installation.

Fiber optic aerial cables are used in telecommunication networks that are installed on poles, towers, or other structures above the ground. Aerial fiber optic networks are designed to provide high-speed internet, television, and telephone services to homes and businesses. These are often used in rural or suburban areas where it is impractical or too expensive to bury cables underground. They are also commonly used in urban areas where there are already existing poles and infrastructure to support the installation of these networks.

Aerial fiber optic cable is a type of fiber optic cables that is usually used for outside installation on poles. Due to its installation environment, the design of aerial fiber optic cable must consider to protect it from the destruction of the nature and man-made damage or theft. Aerial cable's laying method is not hard to implement as it can utilize the existing overhead pole line to install that saves more in construction costs and shortens the construction period. Aerial cables are mainly used for secondary trunk level and below and usually applied to flat terrain or low fluctuation area. They are easily affected by the natural disasters, such as typhoons, ice, floods etc. as well as the influence of an outside force and the mechanical strength weakening in themselves. Therefore, the failure rate of aerial fiber optic cables are higher than the pipeline or directly buried fiber optic cables.

Aerial optical cable is suspended in the air from poles and/or support structures. Most often it is supported between poles by being lashed to a wire rope messenger strand with a small gauge wire.The strand is tensioned to satisfactorily withstand the weight of the cable for the span length it will be used on plus any climatic loading such as ice, snow, and wind.

Rubber cable is the use of rubber as the insulation material of the cable, which can withstand a higher load, in the power system, machinery, steel, and other fields widely used.

Rubber has been used as cable insulation and sheathing material long before other insulation such as PVC and PE can to be commonly applied. It remains widely used across domestic and industrial applications.

Rubber cable is a rubber sheathed cable, as the name suggests is a variety of rubber or equivalent performance of the thermosetting elastomer for the insulation and sheath-based wire and cable. The so-called thermosetting plastic elastomer is after a heating curing, its shape is because molecular chain internal hinge and make the shape to stabilize (usually the process called curing or cross-linking) again on the heating can not let it again to viscous flow state, and then again the of processing and molding of the elastomer.

Construction projects have seen tremendous advancements in technology, which have paved the way for innovative solutions to improve structural integrity and safety. One of those solutions is prestressed concrete strand (PC strand).

Ever wondered how several construction designs for tower construction, such as long-span bridges and overhead crane beams, stay intact and secured? Industrial steel strands are an essential piece of hardware used in these concrete structures for reinforcement and security.

PC strand, also known as prestressed concrete strand, is a type of steel reinforcement used in construction. It is made by taking high-tensile steel wire and subjecting it to a process known as prestressing.

Industrial strands are a crucial piece of hardware used for reinforcement and securement in concrete structures. Construction designs often use various types of strands for tower construction, large-span bridges, and overhead crane beams.Since industrial strands are responsible for supporting thousands of pounds of concrete, only the strongest, most durable materials must be used. Although nearly all industrial strands are made from steel, several different types are designed for varying applications.

PC Strand, the prestressed concrete steel strand, is a twisted steel cable composed of 2, 3, 7 or 19 high strength steel wires and is stress-relieved (stabilized) for prestressed concrete or similar purposes.

XLPE or Cross-linked polyethylene is a thermoset insulation material. Crosslinking polymers is a process which changes the molecular structure of the polymer chains so that they are more tightly bound together and this crosslinking is done either by chemical means or physical means. Chemical crosslinking involves the addition of chemicals or initiators such as silane or peroxide to generate free radicals which form the crosslinking. Physical crosslinking involves subjecting the polymer to a high energy source such as high-energy electron or microwave radiation.Polyethylene (PE) material itself has excellent dielectric strength, high insulation resistance, and a low dissipation factor at all frequencies making it an ideal insulator, however it is limited in its temperature range. Cross-linking the PE to become XLPE increases the temperature range of the insulation whilst maintaining the electrical properties.

The XLPE insulation material is produced by chemically cross-linking polyethylene molecules. This process enhances the material’s strength and stability, improving its ability to withstand high temperatures and electrical stresses. XLPE cable has a higher operating temperature compared to PVC (polyvinyl chloride) insulated cables.