Taolo ea boleng ba lintho tse tala

Taolo ea Boleng ba Lintho tse tala:

Copper Wire Rod: Thupa ea koporo e se nang oksijene, e fanoang ke sebaka se pota-potileng se boreleli, ha ho na li-burrs, lepetso, tšenyo e bonahalang ea mochini le ho fifala ha oxidation. Phoso ea bophara le ho hanyetsa ha Volume ho 20 ℃ e ka amoheleha.

Molamu oa Aluminium: L4/L9 Aluminium rod, e fanoeng ke sebaka se pota-potileng se boreleli, ha ho na li-burrs, lepetso, litšila tse mafura le tšenyo e bonahalang ea mochini. Phoso ea bophara le ho hanyetsa ha Volume ho 20 ℃ e ka amoheleha.

XPLE Granule le PVC(e tloaelehileng kapa e thibelang malakabe) Bakeng sa Sheath le Insulation: Pono e hlakileng e fana ka granule ea 'mala e se nang litšila. Matla a tsitsitseng, bolelele nakong ea khefu, le ho hanyetsa molumo kaofela li finyella litekanyetso.

Theipi ea Lihlomo: Theipi ea tšepe / terata ea tšepe, Botenya le phoso ea bophara e tlameha ho ba e utloahalang, e fana ka sebaka se hloekileng se se nang sekoli.

PYJD/PYJJ/PYJBJ/PSD: E fana ka esita le granule ea 'mala o motšo, ha ho phofo e setseng, sebopeho se kang sengoathoana se le seng. Matla a tsitsipano le bolelele nakong ea khefu li tlameha ho amoheleha.
Taolo ea Boleng ba Ts'ebetso ea Tlhahiso:

Teko ea Mokhanni: Do visually check and measurement by micrometer, conductor resistance test by lab device.

Insulation le Sheath Test: Tekanyo ea botenya ka sesebelisoa sa lab.

Crosslinking Reaction Test: Lab result by thermal elongation test device.

Filler le lera la ho robala: Do visually test, must be in position evenly with no visible damage.

Tlhahlobo ea skrine: Visually check and measurement by micrometer, conductor resistance test by lab device.

Teko ea Theipi ea Lihlomo: Visually check and measurement by micrometer, situation evaluation about armored around bedding layer and filler.

Teko ea Kantle ea Insulation Layer: Spark tester by lab, result must be acceptable.
Teko ea Sehlahisoa Pele se Romeloa:

Teko ea Mokhanni: Tekanyo ea bophara ka micrometer, le teko ea ho hanyetsa conductor ka sesebelisoa sa lab.

Teko ea Insulation: Phoso ea botenya ka tlase ho 0.1mm. cross section pono fana ka junifomo le bataletseng sehiloeng le esita le mmala. Eccentricity ea insulation e tlameha ho amoheleha.

Teko ea Armored Tape le Non-metal layer Test: Tekanyo ea botenya ka micrometer, Sekhahla sa phoso se tlameha ho amoheleha

Motlakase Llaboratory Teko: Teko ea voltage ea lihora tse 4, tlhahlobo ea khanyetso ea conductor le Teko ea Phallo ea Karolo.

Ho tuka Llaboratory Teko: Thermal elongation test, and test for flame retardancy and smoke.

Printed Mark: Print job must be clean and rub-proof.