Rudis Material Quality Control

Rudis Material Quality Control:

Filum aeris rod: Oxygeni liberorum aenei baculi, rotundo tereti superficiei purae donatae, nullae siliquae, resiliunt, visibilia damna mechanica et oxidationis color. Diameter Error et Volumen resistivity at 20 acceptabile esse potest.

Aluminum Rod: L4/L9 Aluminium virga, data tereti superficie rotundo, nulla lappa, rimam, sordes pinguia et damnum mechanicum visibile. Diameter Error et Volumen resistivity at 20 acceptabile esse potest.

XPLE Granule et PVC (normalis vel flammea retardat) Vagina et Insulation: Clara visualis dat etiam granulum colorem nullis immunditiis. Distrahens fortitudo, elongatio in confractus, et volubilis resistivity omnibus signis conveniant.

Tape armatae: Ferro taeniola / chalybe filum, Crassitudo et latitudo error rationabilis esse debet, mundam superficiem non-defectivam dat.

PYJD/PYJJ/PYJBJ/PSD: Dat etiam granulum nigrum colorem, nullum pulveris sinistrum, figura quasi unum. Distrahentes vires et elongationem intermissum gratum esse debet.
Processus Productio Quality Control:

Conductor Test: Do visually check and measurement by micrometer, conductor resistance test by lab device.

Insulation et in vagina Testam; Crassitudo mensurae per lab fabrica.

Crosslinking reactionem Test: Lab result by thermal elongation test device.

Accumsan consectetur lectus et; Do visually test, must be in position evenly with no visible damage.

Screen Test: Visually check and measurement by micrometer, conductor resistance test by lab device.

CATAFRACTATUS Tape Test: Visually check and measurement by micrometer, situation evaluation about armored around bedding layer and filler.

Extra Insulation Layer Test: Spark tester by lab, result must be acceptable.
Product Ante Shipment Test:

Conductor Test: Mensuratio diametri per micrometer, et conductor resistentiae per lab fabrica experimentorum.

Insulatio Test: Crassitudo errorum minus quam 0.1mm. Sectio transversalis uisum dat uniformem et planam incisam cum etiam colore. Nulla est eccentricitas accepta.

CATAFRACTATUS Tape et Non metalli iacuit Test: Crassitudo mensurae per micrometrum, Error rate acceptabilis est

Electrical Labortivum Test: 4 horas voltage test, conductor resistentiae test et partialis officii test.

Combustion Labortivum Test: Thermal elongation test, and test for flame retardancy and smoke.

Printed Mark: Print job must be clean and rub-proof.