Kontrol Kualitas Bahan Baku

Kontrol Kualitas Bahan Baku:

Batang kawat tembaga: Oksigen-free rod tembaga, diwenehi dening babak resik lumahing Gamelan, ora ana burrs, retak, katon karusakan mechanical lan oksidasi discoloration. Kesalahan diameter lan resistivity Volume ing 20 ℃ bisa ditrima.

Batang Aluminium: L4/L9 Aluminium rod, diwenehi dening bunder lumahing Gamelan resik, ora ana burrs, retak, rereget greasy lan karusakan mechanical katon. Kesalahan diameter lan resistivity Volume ing 20 ℃ bisa ditrima.

XPLE Granule lan PVC (normal utawa flame-retardant) Kanggo Sheath lan Isolasi: Visual sing cetha menehi granula warna sing ora ana impurities. Kekuwatan tensile, elongation ing break, lan volume resistivitas kabeh ketemu standar.

Tape lapis baja: Pita baja / kawat baja, Kekandelan lan kesalahan lebar kudu cukup, menehi permukaan sing ora rusak lan mulus.

PYJD/PYJJ/PYJBJ/PSD: Menehi malah granule werna ireng, ora wêdakakêna kiwa, wangun kaya siji Piece. Kekuwatan tensile lan elongation ing break kudu ditrima.
Kontrol Kualitas Proses Produksi:

Tes konduktor: Do visually check and measurement by micrometer, conductor resistance test by lab device.

Isolasi lan tes sarung: Pengukuran ketebalan kanthi piranti lab.

Uji Reaksi Crosslinking: Lab result by thermal elongation test device.

Lapisan pangisi lan sprei: Do visually test, must be in position evenly with no visible damage.

Tes layar: Visually check and measurement by micrometer, conductor resistance test by lab device.

Tes pita lapis baja: Visually check and measurement by micrometer, situation evaluation about armored around bedding layer and filler.

Test Lapisan Insulasi njaba: Spark tester by lab, result must be acceptable.
Test Produk Sadurunge Pengiriman:

Tes konduktor: Pangukuran diameter kanthi mikrometer, lan uji resistensi konduktor kanthi piranti lab.

Tes Isolasi: Kesalahan ketebalan kurang saka 0.1mm. bagean salib visual menehi Cut seragam lan warata karo malah werna. Eksentrisitas insulasi kudu ditrima.

Tape lapis baja lan uji lapisan Non-logam: Pangukuran ketebalan kanthi mikrometer, Tingkat kesalahan kudu bisa ditampa

listrik Laboratory Tes: Tes voltase 4 jam, tes resistensi konduktor lan Tes Discharge Parsial.

Pangobongan Laboratory Tes: Thermal elongation test, and test for flame retardancy and smoke.

Printed Mark: Print job must be clean and rub-proof.