Tham số
Danh mục Diện tích mặt cắt ngang | Nominal Thickness Insulation | overall diameter | cable Weight | DC Resistance at 20℃Insulation min | Current Carrying Capacity at 30℃ | |
In Air | In Pipe | |||||
mm² | mm | mm | km/kg | M.Ω.km | mm² | mm |
1 × 1.5 re | 0.7 | 3.0 | 18 | 1121 | 27 | 17 |
1 × 1.5 rm | 0.7 | 3.0 | 19 | 1020 | 27 | 17 |
1 × 2.5 re | 0.7 | 3.2 | 28 | 940 | 37 | 23 |
1 × 2.5 rm | 0.7 | 3.5 | 29 | 842 | 37 | 23 |
1 × 4 re | 0.7 | 3.7 | 42 | 784 | 49 | 29 |
1 × 4 rm | 0.7 | 4.0 | 44 | 704 | 49 | 29 |
1 × 6 re | 0.7 | 4.2 | 61 | 667 | 62 | 36 |
1 × 6 rm | 0.7 | 4.6 | 63 | 590 | 62 | 36 |
1 × 10 re | 0.7 | 5.0 | 99 | 538 | 85 | 52 |
1 × 10 rm | 0.7 | 5.5 | 103 | 473 | 85 | 52 |
1 × 16 rm | 0.7 | 6.6 | 159 | 392 | 112 | 70 |
1 × 25 rm | 0.9 | 8.3 | 253 | 400 | 161 | 95 |
1 × 35 rm | 0.9 | 9.5 | 346 | 348 | 182 | 119 |
1 × 50 rm | 1.0 | 11 | 462 | 326 | 226 | 151 |
1 × 70 rm | 1.1 | 13 | 664 | 303 | 283 | 190 |
1 × 95 rm | 1.1 | 15 | 912 | 262 | 336 | 227 |
1 × 120 rm | 1.2 | 17 | 1147 | 254 | 396 | 271 |
1 × 150 rm | 1.4 | 19 | 1413 | 266 | 449 | —— |
1 × 185 rm | 1.6 | 21 | 1775 | 271 | 514 | —— |
1 × 240 rm | 1.7 | 24 | 2332 | 252 | 607 | —— |
1 × 300 rm | 1.8 | 27 | 2904 | 240 | 669 | —— |
1 × 400 rm | 2.0 | 30 | 3710 | 235 | 831 | —— |
1 × 500 rm | 2.2 | 34 | 4673 | 228 | 950 | —— |
Cấu trúc cáp
● Conductor: [re] round solid conductor
[rm] circular stranded conductor
● Insulation: XLPE
Mã chỉ định
N2XA
Ứng dụng
For Installations as underground,outdoor ,indoor,in ducts and where mechanical protection is required or for higher tensile stresses during installation and operation.
Tiêu chuẩn
Indonesia standards:Conductor SNI IEC 60228,SPLN 41-1,insulation SNI IEC 60502-1,SPLN 41-9
Thông số kỹ thuật
Rated voltage:U0/U 0.6/1 kV
Temperature Rating Maximum Operating: +90℃
Maximum Short-Circuit :+250℃
Minimum. Bending Radius:15×overall diameter
Chứng chỉ
CE, RoHS, CCC, Kema và nhiều thứ khác theo yêu cầu