Parameter
Nom.Cross-section Area | Nominal Thickness Insulation | overall diameter | cable Weight | DC Resistance at 20℃Insulation min | Current Carrying Capacity at 30℃ | |
In Air | In Pipe | |||||
mm² | mm | mm | km/kg | M.Ω.km | mm² | mm |
1 × 1.5 re | 0.7 | 3.0 | 18 | 1121 | 27 | 17 |
1 × 1.5 rm | 0.7 | 3.0 | 19 | 1020 | 27 | 17 |
1 × 2.5 re | 0.7 | 3.2 | 28 | 940 | 37 | 23 |
1 × 2.5 rm | 0.7 | 3.5 | 29 | 842 | 37 | 23 |
1 × 4 re | 0.7 | 3.7 | 42 | 784 | 49 | 29 |
1 × 4 rm | 0.7 | 4.0 | 44 | 704 | 49 | 29 |
1 × 6 re | 0.7 | 4.2 | 61 | 667 | 62 | 36 |
1 × 6 rm | 0.7 | 4.6 | 63 | 590 | 62 | 36 |
1 × 10 re | 0.7 | 5.0 | 99 | 538 | 85 | 52 |
1 × 10 rm | 0.7 | 5.5 | 103 | 473 | 85 | 52 |
1 × 16 rm | 0.7 | 6.6 | 159 | 392 | 112 | 70 |
1 × 25 rm | 0.9 | 8.3 | 253 | 400 | 161 | 95 |
1 × 35 rm | 0.9 | 9.5 | 346 | 348 | 182 | 119 |
1 × 50 rm | 1.0 | 11 | 462 | 326 | 226 | 151 |
1 × 70 rm | 1.1 | 13 | 664 | 303 | 283 | 190 |
1 × 95 rm | 1.1 | 15 | 912 | 262 | 336 | 227 |
1 × 120 rm | 1.2 | 17 | 1147 | 254 | 396 | 271 |
1 × 150 rm | 1.4 | 19 | 1413 | 266 | 449 | —— |
1 × 185 rm | 1.6 | 21 | 1775 | 271 | 514 | —— |
1 × 240 rm | 1.7 | 24 | 2332 | 252 | 607 | —— |
1 × 300 rm | 1.8 | 27 | 2904 | 240 | 669 | —— |
1 × 400 rm | 2.0 | 30 | 3710 | 235 | 831 | —— |
1 × 500 rm | 2.2 | 34 | 4673 | 228 | 950 | —— |
Kapangidwe ka Chingwe
● Conductor: [re] round solid conductor
[rm] circular stranded conductor
● Insulation: XLPE
Kusankhidwa kwa Code
N2XA
Kugwiritsa ntchito
For Installations as underground,outdoor ,indoor,in ducts and where mechanical protection is required or for higher tensile stresses during installation and operation.
Standard
Indonesia standards:Conductor SNI IEC 60228,SPLN 41-1,insulation SNI IEC 60502-1,SPLN 41-9
Deta yaukadaulo
Rated voltage:U0/U 0.6/1 kV
Temperature Rating Maximum Operating: +90℃
Maximum Short-Circuit :+250℃
Minimum. Bending Radius:15×overall diameter
Zikalata
CE, RoHS, CCC, KEMA ndi ena ambiri mukapempha